GE GSD2204PWW Guide D'utilisation Et D'entretien page 6

HOW TO OPERATE YOUR DISHWASHER
Load your dishwasher according to the instructions in the USE AND CARE GUIDE.
CYCLES
SELECT A CYCLE
1
AND OPTIONS
How to select a cycle
NOTE: Your dishwasher will have
familiar with the choice your dishwasher has. To make sure you have clean dishes, you should
always choose a higher performance cycle if you are not certain. Slowly turn the Dial to the
START or ON position, or the selected cycle. Don't turn it past the START, ON or cycle position ;
you could accidentally miss a prewash. There is a time delay between start-up and water fill so
you will not hear any wash action right away.
Cycles
POTS AND PANS / HEAVY
NORMAL
Options
HOT START
HI-HEAT WASH
HI-HEAT DRY / ROCKER
SWITCH
RESET
Cycles
HOTSTART / HOT
PREWASH
HEAVY
NORMAL
RINSE ONLY
PLATE WARMER /
DRYING
LIGHT / WATERSAVER
DELAY START
6
WITH TIMER DIAL WITH TIMER DIAL
HOW TO GET STARTED (3 EASY STEPS)
OPTIONS
CLOSE DISHWASHER
AND LATCH
some
or all of these cycles or options. Read the list to become
CYCLES ON TOUCHPADS
Use to effectively remove heavy and dried on soil. This cycle will not removed burned-on
food.
For loads of everyday dishes.
OPTIONS / ROCKER SWITCH
Preheats wash water to the correct temperature.
Provides extra heat for best performance. It is used best with heavily-soiled dishes.
Turn the drying heater on for fast drying. This option will extend the time to your wash
cycle by approximately 40 minutes. DO NOT USE WITH RINSE ONLY CYCLE.
Touch RESET to cancel option.
CYCLES ON DIALS
Preheats wash water to best temperature.
1) Select a cycle and any options. 2) Be sure the door is unlatched.
3) Slowly turn the dial to HOTSTART. 4) Latch the door to START the cycle.
For heavily soiled dishes or cookware with dried-on soils. Everyday dishes may be included.
This cycle will not remove burned-on food.
For loads of everyday dishes, glasses, cookware with medium soil. Designed to yield high
performance on average soils and maximum energy efficiency and minimum water
consumption.
For rinsing loads that will be washed later. DO NOT USE DETERGENT.
1) Be sure the door is unlatched. 2) Sowly turn the dial to RINSE ONLY. 3) HI-HEAT DRY
is OFF. 4) Latch the door to start the cycle.
For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.
1) Load clean dishes to be warmed. 2) Selected HEAT DRY. 3) Be sure the door is
unlatched. 4) Slowly turn the dial to PLATE WARMER / DRYING. 5) Latch the door and
start the cycle.
For quickly washing loads of everyday dishes with medium soils that have not dried on,
such as loads of glasses.
DELAY START allows you to delay the start time of any PUSH BUTTON CYCLE
automatically. 1) Select your desired cycle and options. 2) Turn the dial to the desired
time. 3) The door must be latched for the dishwasher to operate.
DOOR LATCH
2
PS...Have you added soap and rinse agent?
Cycles Description
Options Description
Cycles Description
TIMER DIAL ROCKER SWITCH
3
TURN TO START