dirna Bergstrom Bycool Slim SCANIA Instructions De Montage page 16

SLIM
EN
2 CABIN EXTERIOR:
Position the Slim Fit in the hatch gap on the
original edgeband, fitting the aligners in the
hatch gap.
3
Remove (4) screws from the interior air
distribution panel and leave this supported by
the cables.
4
Position fastening mounts underneath the
upholstery with flat washer, grower washer and
M8/125x50 screw, and tighten until they come
up against the hexagons of the base.
Hatch
2
3
4
16
®
2