Technical Specifications - Nicols GP 40 R1 Manuel D'utilisation

Mounting:
-Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket should be secured
to the mounting truss or structure using a standard mounting clamp. Please note that when hanging the unit a
safety cable should also be used.
-Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
-NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of the
product using the two adjustment knobs located on the side of the fixture.
The unit should be mounted by its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. The structure to which you are attaching the unit should be able to
support 10 times the weight of the unit. Also always use a safety cable that can hold 12 times the weight of the
unit when installing the fixture.
The equipment must be fixed by professionals.

TECHNICAL SPECIFICATIONS

11-