Remote Control; Initial Setup - Crosley CR7010A Manuel D'instructions

English

Remote Control

42. Program Button
43. Repeat Button
44. Mode Button (FM-AM-Phone/Aux-
CD-Bluetooth-Tape)
45. Mute Button
46. Play Pause Button
47. Random Button
48. Stop Button
49. Backward Skip Button
50. Forward Skip Button
51. Folder Up Button
52. Folder Down Button

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the tie-wrap that is holding the tonearm.
3. Rotate the Turntable Suspension Screw clockwise to allow the turntable to
float on its shock absorbers.
4. Connect AC adaptor to the Power Jack of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
7