Transcend 365 miniCPAP Guide Rapide page 21

Transcend 365 miniCPAP Quick Guide
You can also use the Transcend 365 Water Filter Kit to fill your reservoir.
3.

Unpackage
in the packaging to assemble the kit.
 Place the assembled kit on the Transcend 365 reservoir sitting on
a flat surface.
 Add water to the fill line. Do not overfill the water filter as this will
overflow the reservoir.
 Allow time for water to flow through the filter and fill the reservoir.
Note: It is essential to change the filter when indicated by the color change filter
window (as shown below).
New
Check that the reservoir is at its full capacity by holding it vertically and
4.
viewing the water level. The water should be level with the max fill line.
the Water Filter Kit and follow the instructions contained
Page 21
Time to Change
when gradient
turns color as
shown