Cleaning And Maintenance - Princess 509201 Mode D'emploi

The cool air function can be used for finishing
your hairstyle or for styling fragile, damaged,
over-processed or permed hair.
• Keep the cool air function button (3)
depressed to activate the cool air function
at any time.
• Release the cool air function button (3) to
deactivate the cool air function.
Tourmaline technology
Tourmaline is a semi-precious gemstone with
remarkable electrical properties, which
naturally emits the most negative ions possible
when the material is heated. The ionic function
provides ultimate shine, colour and moisture
protection for your hair. Negative ions
eliminate static electricity on the hair surface
for silky and frizz-free hair.
Tourmaline naturally emits the most infrared
heating. Infrared gently heats the hair from
within. More heat is delivered directly to the
hair shaft, so that the hair can be worked
quickly and easily. Less heat is delivered to
the hair surface, so that the hair will not be
damaged and the hair's moisture and protein
will be preserved.
Tourmaline provides the healthiest, fastest
styling for each hair type with results that last
longer.
Nano silver technology
Nano silver technology works with silver
particles measured by nanometre to capture
excellent microbial effects of silver. Nano silver
is naturally antimicrobial and eliminates bacteria
from the appliance to create a germ-free zone
to protect your health. Silver ultra-fine particles
are manufactured in the nano silver coating.
Nano silver is naturally safe and is non-irritating.

Cleaning and maintenance

The appliance does not require any special
maintenance.
Warning!
• Before cleaning or maintenance, always
switch off the appliance and remove the
mains plug from the wall socket.
• Do not immerse the appliance in water or
any other liquids for cleaning.
• Regularly check the appliance for possible
damage.
• Use a damp cloth to clean the housing of
the appliance.
• Use a clean, dry cloth to dry the appliance.
• Always keep the airflow outlet free of
obstacles (hair, dust, etc.).
• Store the appliance in the original
packaging when not in use.
Cleaning the air intake filter (fig. F)
The air intake filter (6) must be cleaned regularly.
• Push the lock (9) to release the air intake
filter (6).
• If necessary, use a small brush to remove
dust and debris from the air intake filter.
• Push the lock (9) back into the original
position to lock the air intake filter (6).
Disclaimer
Subject to change; specifications can be
changed without further notice.
8