Technical Data; Eelectricity-Fed Pan Series Optima; Technical Characteristics; Installation Instructions - Diamond E77/M50I7-N Instructions D'utilisation

1.
1.1 ELECTRICITY-FED PAN SERIES OPTIMA
MODEL
E77/M50I-7 700 x 700 x 850/985
SUPPLY VOLTAGE : 3N AC 415V; 3 AC 240V ; 1N AC 240V 50/60Hz.
N.B. : Power absorbed with 3N AC 380V; 3 AC 220V; 1N AC 220V 50/60Hz is approx. 16% lower.
1.2

TECHNICAL CHARACTERISTICS

- STAINLESS STEEL FRAME of heavy thickness, mounted on height-adjustable feet and with a rubber support top.
- PAN made of austenitic chromium-molybdenum stainless steel (AISI 316) with a thickness of 15/10 featuring a remarkable
corrosion resistance to salt and wear & tear.
- Hot and cold water inlet TAPS.
- TAPS for water filling and drainage.
- ELECTRICAL SWITCHES to control heating elements in 3 positions for optimum power adjustment.
- ELECTRICAL HEATING ELEMENTS made of Incoloy.
- SAFETY THERMOSTAT to prevent breakages in case if water stoppage.
- CONTROL KNOB made of thermally insulated material.
2.
Installation must be performed by qualified technicians according to the law in force.
WARNINGS:
Should the unit be installed against a wall, the latter must be heat-resistant to temperatures of 100°C and must be fireproof.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
If the unit is installed by itself, it is advisable to fasten it to make its stability safer.
2.1

INFORMATION ABOUT ELECTRICITY-FED PAN SERIES OPTIMA

The serial plate is located : on the back.
SIZE mm.
EXTERN
L x P x A/A max
V
CAPACITY lt.
PAN
INTERSPA.
50 14

INSTALLATION INSTRUCTIONS

KW
- 13 - - 13 - - 13 - - 13 - - 13 -

TECHNICAL DATA

TOTAL
THERMAL
CAPACITY
kW
9
Mod.
Matr. N°
NET
WEIGHT
kg.
75
HZ