Chauvin Arnoux F605 Guide De Démarrage page 12

English
1.1 THE SWITCH
The switch has six positions. To access the
switch to the desired function. Each setting is confirmed by an audible signal. The functions
are described in the table below.
6
5
4
3
2
1
1.2 THE KEYS OF THE KEYPAD
1 2
4 5
, ,
Item
1
OFF mode – Switches the clamp multimeter off
2
AC, DC, AC+DC voltage measurement (V)
3 Continuity test
Resistance measurement Ω
Diode test
4
AC, DC, AC+DC current measurement (A)
5 Power measurements (W, var, VA) and
calculation of the power factor (PF) AC, DC,
AC+DC
6 Indicator of the order of the phases
3
Item
Storage of values, disabling of display
1
Zero correction A
Compensation of the resistance of the leads in the
continuity and ohmmeter function
2 Selection of the type of measurement (AC, DC,
AC+DC)
Selection of single-phase or three-phase
measurement
3 Activation or de-activation of the backlighting
of the display unit
6
4 Activation or de-activation of the MAX/MIN/PEAK
mode
Activation or de-activation of the INRUSH mode in A
5 Measurements of frequency (Hz), of the level of
harmonics (THD)
Display of the powers W, VA, var and PF
6 Activation of the ∆REL mode – Display of relative and
differential values
Clamp Multimeter F605
, , , functions, set the
Function
Function
/A /W /W
DC AC+DC DC AC+DC