4)
Position the ceramic top (H)
inserting
the
protrude from the wall in the 4
holes located in the back part of
the top.
6)
Apply the builders' glue (B)
on to the upper part of each
ceramic leg (A).
Please note:
the legs are interchangeable (they can
both be fastened either to the right or
to the left).
screws
that
5)
Fasten the ceramic top (H)
with the ceramic washers (J).
7)
Insert the legs in their housing
(at the front side corners) under
the ceramic top, as shown.
23
E
N
G