Devon & Devon Serenade Mode D'emploi page 18

4)
Position the
group making sure that the slots
on the bracket correspond with
the rawl plugs.
Please note that the narrowest part of
the bracket must go on the front of the
top.
6)
Lean the structure you have just assembled against the wall,
making sure that it is positioned correctly by using a level in both
a parallel and perpendicular position to the wall.
5)
leg/bracket
the screws (C) and washers (D).
Caution:
Do not the overtighten the screws.
17
Fasten the legs/brackets with
E
N
G