What To Expect; Before Your First Treatment - Beurer tria LAS100 Instructions D'utilisation

WHAT TO EXPECT

h
op
WHILE USING THE TRIA LASER
r • The sensation varies, depending on the person,
treatment area and treatment level. Some
users may feel the sensation of a rubber band
snapping on the skin. Others will feel a warm,
prickling sensation.
•
As the amount of hair in the treated areas
decreases, the sensation will also decrease.
For this reason, you may be able to use a higher
g treatment level after your initial treatments.
• Some users experience mild redness that goes
atch away within 24 hours.
DURING YOUR FIRST 3 MONTHS
OF TREATMENT
•
After your first treatment, there will be no visible
change to the hair. Laser hair removal does not
). cause hair to immediately fall out.
•
With additional treatments, there will be a
gradual reduction in the number of hairs with
each treatment.
•
The hair that does regrow will also begin to
lighten and become finer.
AFTER 3 MONTHS OF TREATMENT
• Hair follicles that have been deactivated by the
ons. Tria Laser will not grow back.
•
up to Do occasional touch-ups or additional treatments
s. if necessary.
eauty 8 9
BEFORE YOUR FIRST
TREATMENT
CHARGE THE TRIA LASER
Charge the Tria Laser for at least 2 hours before
you use it or anytime the battery indicator is
"empty" and blinking. If you are covering a large
area or have the Tria Laser set to a high energy
level, you may need to charge the Tria Laser in the
middle of a treatment. This is normal.
TO CHARGE:
1. Plug the battery charger into the Tria Laser
charger socket and into a power outlet.
2. The battery indicator will show it is "filling up"
while the Tria Laser is charging.
3. Once fully charged, the battery light will stay on
and you may unplug the charger. The Tria Laser
can remain plugged in for extended periods of
time without damage.