Publicité
Les langues disponibles
Les langues disponibles
Notes
With Free-control, you can easily, comfortably,
and conveniently switch your electrical devices. A
minimum functional radio system always consists of
a radio-transmitter and a radio-receiver. With Free-
control (with logo:
), all transmitters can be linked
with all receivers, except for devices with the follo-
wing article numbers xxxx.xxx1.x (with logo:
Liability or any other claims, especially for the reim-
bursement of personal or property damages outside
of the device caused by lack of function or malfunc-
tion are excluded.
All transmitting codes are set at the factory and
cannot be changed.
The radio transmission takes place over a non-ex-
clusive frequency channel of 868 MHz. Malfunctions
are therefore not impossible.
The radio range depends upon transmitting power,
disruptions, and structural conditions.
The reliability of reception decreases with increa-
sing distance between transmitters and receivers.
In buildings, the range depends upon the building
materials used.
Typical range based on material
Masonry
20m - through a maximum of 3 walls
Reinforced concrete
10m - through a maximum of 1 wall/floor
Plasterboard/wood
30m - through a maximum of 5 walls
Free-control radio technology is not suitable for
safety applications, such as EMERGENCY STOP,
EMERGENCY CALL.
Follow the rules of electrical engineering and the
technical data!
Do not make any changes to the devices.
We expressly reserve the right to make changes
due to technical progress, changes in standards,
changes to production procedures, or construction
changes.
Certified for operation in EU, EFTA-member states.
).
The declaration of conformity can be found under
the following address: Heinrich Kopp GmbH •
Alzenauer Straße 68 • 63796 Kahl am Main or www.
free-control.com
For additional information, application examples,
assortment overview, and operating instructions in
the respective language of a country, see
www.free-control.com
7
Publicité
