Temperature Selector - dirna Bergstrom TRP DYNAMIC Manuel De L'utilisateur

DYNAMIC
EN
COMPRESSOR
operation LED indicator
On - Connected
Off - Disconnected
Compressor manual
connection and disconnection
The equipment has two functionning modes:
F4 Automatic mode.
F0 Manual mode.
Other functions:
F1 Digital thermometer.
F2 Time programming.
ºF Selection
F6
(Farenheit).
When starting, equipment will automatically be in Mode F4 (automatic). Manteniendo
If On/Off key is maintained pressed, functions will change as they appear on display F4 , F0 ,
F1 , F2 , F3. Release on desired option.
1
SWITCHING ON/OFF.
Note: when this Key is pushed, the unit starts in automatic
mode F4.
2
Blower speed control (manual mode only)
Note: while the unit is working in automatic mode F4, if the
user press this key, the unit will change the working mode to
manual F0. This allows the user to choose the desired air flow
by pushing this key and the following symbols will appear on
the display: V1, V2, V3, V4, V5, V4, V3, V2, V1.
3

TEMPERATURE SELECTOR

- Between 15º and 27º C - 59-80º F
DISPLAY
+
TEMP
!
Function of control keys
TEMPERATURE SELECTOR
-
ºC
Flashing: compressor connected
ºF
NOTE:
If, during assembly, the unit becomes slanted
or the cabin drops with the unit mounted, wait
for at least 60 minutes from the moment the
unit is horizontal before starting up.
8
Between 15º and 27º
BLOWER SPEEDS
from U1 to U5
UNIT operation LED indicator
Static: compressor shutdown
ON - OFF
1
2
®
3