Disarming using your code or tag
To disarm your system:
Enter a valid code or present a registered TAG.
The disarming tone is emitted by the keypad siren.
Disarming the system will also stop the sirens if an alarm is triggered.
Notes:
Always make sure that your disarming request is followed by the disarming tone.
Always disarm the system when re-entering the premises.
Holding the TAG in front of the keypad will not reverse the status.
800-19461-C
10/2018
The Honeywell Home trademark is used under license from Honeywell International Inc.
Resideo Confidential. © 2018 Resideo Technologies, Inc. All rights reserved.
9