Keypad (Only Available On Sucre Box) - resideo Le Sucre Guide D'utilisation

Keypad (only available on Sucre Box)

The Keypad comprises an integrated siren that will sound in case of alarm.
Installation requirements
Install the keypad:

Near the door generally used to enter into the house

With at least 30 cm clear space around it

About 1.50 m from the floor (for a person 1.70 m to 1.80 m tall)

On a wall
Do not install the keypad:

Outdoors

Near a source of heat (e.g. chimney, radiator, convector, oven, cooking hob)

Near a water point (e.g. bathroom)
How to install
A help video can be found here:
http://honeywell.total-connect.eu/video/GKP-S8M.mp4
How to use and program the keypad
The following section describes how to install and use your wireless keypad. The keypad is
used to arm and disarm your security system using a valid access code or a key TAG.
The first step is to register your keypad and tags on the system via the web portal as for all
other devices.
If you want to use codes to arm and disarm your system you will need to program the
keypad. Please refer to the printed manual that is downloadable here:
http://www.honeywell.com/security/emea/hscdownload
800-19461-C
10/2018
The Honeywell Home trademark is used under license from Honeywell International Inc.
Resideo Confidential. © 2018 Resideo Technologies, Inc. All rights reserved.
7