resideo Le Sucre Guide D'utilisation page 8

By default, user 1 has code 1234. Don't forget to change it at installation!
The keypad is equipped with a proximity tag reader, located next to the
keypad also features an integrated siren as a deterrent and 4 LEDs to inform you on system
status.
Arming using your code or tag
Press an arming key on the keypad and enter the code or present a registered TAG.
The arming tone is emitted by the keypad followed by the exit delay beeps.
The zone set arming is completed automatically at the end of the exit delay.
Note:
Always make sure that your Total arming request is followed by the arming tone.
800-19461-C
10/2018
The Honeywell Home trademark is used under license from Honeywell International Inc.
Arms the total set
Arms the partial set
Resideo Confidential. © 2018 Resideo Technologies, Inc. All rights reserved.
symbol; the
8