LG PREMTB10U Manuel D'installation Et D'utilisation page 70

INSTALLATION INSTRUCTIONS
70
Function code,
ESP code
ESP value
• Please be careful when adjusting ESP values.
• It does not work to setup ESP value for weak/power step for some products.
• ESP value range is dependent on product.
Select ESP fan step again by using
6
buttons and set up ESP values as No. 4
and 5 to correspond to each fan speed.
Press button to save.
7
Press button to exit.
8
After setup, it automatically exits after
25 seconds if there is no input. If the
Setting/Cancel button is not pressed, the
mode will not change.