LG PREMTB10U Manuel D'installation Et D'utilisation page 21

Standard Operation - Hold
It is a function that holds the current mode of operation.
- If it is on hold, daytime schedule cannot be programmed.
- If it is on hold, current room temperature does not display.
• You can't change setting in 'Hold' except cancel the 'Hold'
• It can be canceled, if the thermostat receives a command from another controller.
• When commands are received by other controllers, the Hold mode gets deactivated.
OPERATION INSTRUCTION
Operate Hold mode.
Press button for 3 seconds,
you can operate 'Hold' function.
Cancel Hold mode.
Press button for 3 seconds in 'Hold',
you can cancel 'Hold'.
If Hold mode is cancelled with daytime
schedule programmed, it runs the latest
schedule.
21