Turning On/Off The System; Adjusting The Clock - Yamaha TSX-120 Mode D'emploi

PREPARATIONS BEFORE USING THIS UNIT

Turning on/off the system

1
Connect the power cable to the wall
outlet.
2
Press ON/OFF to turn on the system.
When the system is on: "Hello" appears, then clock and
other information are displayed.
Example: iPod playback mode display
When the system is off: "Good-bye" appears, then only
date and time are displayed.
y
• This unit has an auto off function, which will automatically
switch the system to off if the system is left turned on for 1 hour
without playback or any other operation being performed. This
function is only available when the source is set to iPod.
• Press and hold ON/OFF on the top of the unit for more than 3
seconds to set the system to standby mode. All the information
on the front panel display is not displayed in standby mode.
This can reduce the power consumption. To cancel standby
mode, press ON/OFF.
• Even in system off/standby mode, the alarm function is
available.
• The memory back-up circuit prevents stored data such as the
time setting from being lost even in system off/standby mode.
4
En

Adjusting the clock

The clock is not set at the factory.
1
Press CLOCK SET.
2
Select each setting with MENU
and confirm with Center.
You can set YEAR → MONTH → DAY → TIME.
Notes
• This operation can be performed only with the remote control.
• Time appears in 12-hour notation (AM/PM), depending on the
model. For example, "4:00PM".
• You can switch 12-hour/24-hour notation by pressing
FUNCTION → MENU
FORMAT, then pressing MENU
12H/24H.
• The time settings are lost after one week when the power cable
is disconnected from the wall outlet.
→ Center to select TIME
/
→ Center to select
/
/