Glen Dimplex LAK 6IMR Instructions D'installation Et D'utilisation page 41

8 Additional model features
8.1 Type of defrosting
8.2 Condensate tray frost protection /
Water in device is protected from freezing
8.3 Max. operating overpressure (heat source/heat sink)
9 Heat output / coefficients of performance (COP)
5
9.1 Heat output / COP
at A-15 / W35
at A-7 / W35
at A-7 / W55
at A2 / W35
at A7 / W35
at A7 / W45
at A7 / W55
at A10 / W35
at A20 / W35
at A20/ W55
9.2 Cooling capacity / COP
at A27 / W7
at A27 / W18
at A35 / W7
at A35 / W18
1. The specified sound levels apply if the supporting feet (available as an option) are not used. If the supporting feet are used, the level can increase by up to 3 dB (A).
2. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation at 35°C flow temperature.
The specified sound pressure level is the free sound area level. The measured value can deviate by up to 16 dB(A) depending on the installation location.
3. Please note that additional space is required for pipe connections, operation and maintenance.
4. Factory default 6 kW
5. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and the
regulation should be taken into consideration. These figures are only achieved with clean heat exchangers. Instructions for care, commissioning and operation can be found in the
relevant sections of the installation and operation instructions. The specified values have the following meaning, e.g. A7 / W35: Heat source temperature 7 °C and heating water
flow temperature 35 °C.
6. Maximum heating/cooling output
7. Max. intake incl. pipe heating and immersion heater (state of supply)
8. See CE declaration of conformity
9. The heat circulating pump and the heat pump controller must always be ready for operation.
10.COP-optimised operation
www.dimplex.de
Reverse circulation Reverse circulation Reverse circulation Reverse circulation
No / Yes
9
bar 3.0
EN 14511
10
3,6 / 2,3
kW / ---
6
3,6 / 2,3
kW / ---
10
4,2 / 2,8
kW / ---
6
4,2 / 2,8
kW / ---
10
2,9 / 1,8
kW / ---
6
2,9 / 1,8
kW / ---
10
4,8 / 3,4
kW / ---
6
4,8 / 3,4
kW / ---
10
5,6 / 4,8
kW / ---
6
5,6 / 4,8
kW / ---
10
5,4 / 3,4
kW / ---
6
5,4 / 3,4
kW / ---
10
5,1 / 2,9
kW / ---
6
5,1 / 2,9
kW / ---
10
6,0 / 5,1
kW / ---
6
6,0 / 5,1
kW / ---
10
7,3 / 5,8
kW / ---
6
7,3 / 5,8
kW / ---
10
5,7 / 3,4
kW / ---
6
5,7 / 3,4
kW / ---
6
6,5 / 3,3
kW / ---
6
8,7 / 4,2
kW / ---
6
6,2 / 2,6
kW / ---
6
9,0 / 3,4
kW / ---
452162.66.09 · FD 9606
LAK 6IMR - LAK 14ITR
No / Yes Yes/ Yes
3.0 3.0
EN 14511
5,2 / 2,3 10,9 / 2,4
5,2 / 2,3 10,9 / 2,4
6,3 / 2,4 13,1 / 2,7
6,3 / 2,4 13,1 / 2,7
4,2 / 1,7 9,0 / 1,7
4,2 / 1,7 9,0 / 1,7
5,3 / 3,6 10,7 / 3,3
6,2 / 3,2 12,3 / 3,3
5,6 / 4,8 10,2 / 4,4
9,0 / 4,3 14,6 / 4,4
5,4 / 3,4 9,1 / 3,8
8,3 / 3,3 14,0 / 3,5
5,1 / 2,9 8,7 / 2,9
6,2 / 2,6 12,9 /2,9
6,0 / 5,1 10,8 / 4,6
9,6 / 4,5 14,9 / 4,4
7,3 / 5,8 13,1 / 5,7
10,8 / 5,3 18,8 / 5,7
5,7 / 3,4 10,6 / 3,6
8,4 / 3,2 16,9 / 3,7
6,5 / 3,3 12,4 / 3,1
8,7 / 4,2 16,4 / 3,8
6,2 / 2,6 11,8 / 2,5
9,0 / 3,4 14,0 / 3,1
Yes/ Yes
3.0
EN 14511
10,6 / 2,4
10,8 / 2,4
13,9 / 2,9
13,9 / 2,9
11,3 / 2,1
11,3 / 2,1
10,5 / 3,6
11,0 / 3,2
10,6 / 4,1
14,7 / 4,3
9,8 / 3,7
13,9 / 3,3
8,8 / 2,9
13,2 / 2,7
11,3 / 4,5
15,7 / 4,3
13,9 / 5,5
22,3 / 5,1
10,8 / 3,8
16,2 / 3,6
12,9 / 3,0
17,1 / 3,7
12,3 / 2,5
15,5 / 3,3
EN-19