The Payment Box; Supplied As Standard; Compatibility; Maintenance - Jura 579 Mode D'emploi

1

The payment box

Supplied as standard

Z
Housing (with built-in MDB interface)
Z
2 keys
Z
Coin box
Z
Mains adapter
Z
Mains cable with mains plug
Z
RS232 cable
Z
USB cable
Z
PC software payment box / compact payment
box

Compatibility

The payment box is compatible with all profes-
sional models in the GIGA and IMPRESSA X lines
(except IMPRESSA X30/X7/X70/X95/X90 and X
X 90 avantgarde).
s
Please note that not all available accounting
systems are compatible with the payment box. The
payment box has been tested with the following
accounting systems:
Z
NRI G-13 Coin Validator
Z
Hug-Witschi DIVA2
Z
PBV Kaufmann Mifare-Vending-Reader VR1
Z
Microtronic Mlight5-Leser
Z
Fage Oscar/Giody
Z
Evis Legic Gecko
E
You can always find the most up-to-date list
on our website (www.jura.com).

Maintenance

Do not use harsh or abrasive cleaning agents or
hard objects to clean the machine. These may
damage the coating of the housing.

2 Installing the payment box

E
To connect the payment box to the coffee
machine, a functioning accounting system
must be installed.
E
The steps for installation in the coffee
machine depend on whether you are using
the Intelligent Fresh Water Kit or not.
E
Remove the rear wall of the payment box to
connect the various cables to the MDB
interface. Screws for attaching the rear wall
from the inside after connecting the cables
are supplied with the unit.
Connecting to the machine without the
Intelligent Fresh Water Kit
T
Switch off the coffee machine at the power
switch.
T
Move switch for accounting mode to
bottom position (payment mode).
T
Connect RS232 cable to coffee machine.
T
Insert the mains plug into a power socket.
T
Switch on coffee machine.
The payment box and automatic coffee
machine are ready for use.
Connecting to the machine with the Intelli-
gent Fresh Water Kit
T
Switch off the coffee machine at the power
switch.
95/
s
T
Move switch for accounting mode to
bottom position (payment mode).
T
Connect RS232 cable to Mini Hub of Intelli-
gent Fresh Water Kit.
T
Insert the mains plug into a power socket.
T
Switch on coffee machine.
The payment box and automatic coffee
machine are ready for use.

3 Configuring the payment box

Follow the steps below to configure the payment
box (e.g. select the machine type).
Precondition: the PC software of the payment
box is installed.
T
Switch off the coffee machine at the power
switch.
T
Unplug the payment box from the power
socket.
T
Remove the RS232 cable.
T
Connect the payment box to the PC with the
USB cable.
T
Insert the mains plug of the payment box
into a power socket.
The payment box will switch on.
T
Configure the payment box with the PC
software.
E
The instructions for use for the PC software
are contained in the software.
Payment box / Compact payment box
de
en
fr
it
nl
es
pt
sv
ru
pl
9