Removing The Payment Box; Removing From A Machine Without The Intelligent Fresh Water Kit; Removing From A Machine With The Intelligent Fresh Water Kit; Accounting Mode - Jura 579 Mode D'emploi

Masquer les pouces Voir aussi pour 579:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Payment box / Compact payment box
T
Remove the USB cable.
The payment box will switch off again. The
changes will be applied the next time it is
switched on.
T
Reconnect the RS232 cable.
T
Switch on coffee machine.
E
Prices can be set or changed at any time.
There is no need to switch off the coffee
machine or payment box.

4 Removing the payment box

Removing from a machine without the
Intelligent Fresh Water Kit
T
Move switch for accounting mode to top
position (non-payment mode).
T
Wait approximately 5 seconds.
T
Switch off the coffee machine at the power
switch.
T
Disconnect the mains plug.
T
Remove RS232 cable from coffee machine.
Removing from a machine with the Intelligent
Fresh Water Kit
T
Move switch for accounting mode to top
position (non-payment mode).
T
Wait approximately 5 seconds.
T
Switch off the coffee machine at the power
switch.
T
Disconnect the mains plug.
T
Remove RS232 cable from Mini Hub of
Intelligent Fresh Water Kit.

5 Accounting mode

Switch for accounting mode:
Z
Top position:
U
Machine is in non-payment mode
U
Status LED flashes
Z
Bottom position:
U
Machine is in payment mode
U
Status LED on continuously
E
The accounting mode must not be changed
while a drink is being prepared.
E
If the connection between the payment box
and the coffee machine is broken in pay-
ment mode, all products are locked. No
products can be prepared.
10

6 LED indicators

Status LED (9):
Z
On: No errors; compact payment system
functioning
Z
Off: Error (mains plug not plugged in, unit not
connected to coffee machine or faulty LED)
Z
Flashing (1 s on / 1 s off): No errors; non-pay-
ment mode is active
Z
Flashing rapidly: No errors; external accounting
system connected and active; machine is in
payment mode

7 Technical data

Voltage
Current
Conformity symbol
Ambient conditions
Length of mains cable
Length of RS232 cable
Weight (without
accounting system)
Dimensions (W × H × D) Payment box:
Directives
The machine complies with the following direc-
tives:
Z
2002/95/EC (RoHS)
Z
1907/2006/EC (REACH)
Z
2006/95/EC (Low Voltage Directive)
Z
2004/108/EC (Electromagnetic Compatibility)
Z
2009/125/EC (Ecodesign Directive)
100–240 V ~, 50/60 Hz
300 mA
A
Air humidity max. 80%,
ambient temperature
10–35°C
approx. 2 m
approx. 1,1 m
Payment box: 6,4 kg
Compact payment box:
approx. 2,5 kg
10 × 45 × 32 cm
Compact payment box:
10,4 × 30,4 × 19,5 cm

Publicité

Table des Matières
loading

Table des Matières