Historical Memory - Stabila LD 400 Mode D'emploi

D
GB
Stake out function
F
This function is helpful when staking out equal
I distances, e.g in the erection of wooden substruc-
tures. See drawing {I}
E
1x briefly: the
NL
A value is displayed in the summary row (default
P
value 1.000 m). This value can be adjusted to the
N
desired stake out distance.
FIN The value is increased.
DK
The value is reduced.
S
Holding the button down accelerates the speed at
TK
which the value changes.
1x briefly: starts continuous measurement.
CZ
SK
In intermediate line 1, the set distance or the next
appropriate multiple thereof is displayed.
PL
In the summary row, the distance to the next appro-
SLO
priate stake out point is displayed.
HR
When approaching a stakeout point (to less than
0,10 m), the instrument starts to beep. When the
H
point is reached, the beep sound changes and inter-
RO
mediate line 1 starts to flash.
GR
1x briefly: distance measurement is interrupted
RUS
and the instrument switches back to individual
distance measuring mode.
LV
EST
LT
J
Functions
KOR
symbol is displayed.

Historical memory

1x briefly: the
value are displayed.
Use to navigate through the last 10 values.
The values can also be used in functions.
Using stored values in functions
Using added distances in area functions (e.g. wall
surfaces or painters):
Adding distances (see additions / subtractions)
Call up area function to e.g. measure the height
of a room.
1x briefly: calls up the historical memory and to
possibly search for the correct value.
1x long: the value is entered into the function
and the result of the function (e.g. area) is
displayed.
8
symbol and the last measured
Stabila LD 400