Connecting A Digital Audio System; Connecting An Amplifier/Dvd Home Theater - Samsung HL-T7288W Manuel Du Propriétaire

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jack on the TV and
the Digital Audio Input jack on the
Digital Audio System.
When a Digital Audio System
is connected to the DIGITAL
AUDIO OUT (OPTICAL) terminal:
Decrease the volume of the TV,
and adjust the volume level with
the audio system's volume control.
➢ Each Digital Audio System has a different back panel configuration.
➢
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
What is OPTICAL?
● Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of
digital audio in the form of a light wave that uses a glass conductor.
DIGITAL AUDIO OUT (OPTICAL)
➢
When a DVD player or Cable/Satellite box is connected to the COMPONENT or HDMI IN jacks on the TV, the Optical jack outputs 2.1
channel audio only. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the player or box
directly to the Digital Audio System, not the TV.
Connecting an Amplifier/DVD Home Theater
1 Connect Audio Cables between
the AV OUT [L-AUDIO-R] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the AV OUT [L-
AUDIO-R] terminals: Decrease the
volume of the TV, and adjust the
volume level with the amplifier's
volume control.
➢ Each Amplifier/DVD Home Theater has a different back panel configuration.
➢
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
Digital Audio System
1
RF (Digital/Analog), AV, S-Video
Amplifier/DVD Home Theater
Audio Cable (Not supplied)
1
English - 15
Optical Cable (Not supplied)
Sound is output
TV Rear Panel
TV Rear Panel