Repeating Music Play
You can play music repeatedly.
1
After switching the mode to WISELINK, select a memory device that you have
installed. (Refer to page 70~71)
2
Press the ▲ or ▼ button to select Music, then press the ENTER button.
MP3 files and existing folders are displayed.
3
Press the ▲ or ▼ button to select a music, then press the blue button.
Press the ▲ or ▼ button to select Repeat mode, then press the ◄ or ► button to
select On.
To cancel Repeat mode, select Off.
To exit WISELINK mode, press the EXIT button on the remote control.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Deleting the Music files
You can delete music (MP3) files saved on the USB storage device.
1
After switching the mode to WISELINK, select a memory device that you have
installed. (Refer to page 70~71)
2
Press the ▲ or ▼ button to select Music, then press the ENTER button.
MP3 files and existing folders are displayed.
3
Press the ▲ or ▼ button to select a music file to be deleted and then press the blue
button.
4
Press the ▲ or ▼ button to select Delete or Delete All and then press the ENTER
button.
If you select Delete, only the selected music will be deleted.
➢
If you select Delete All, all music files in the selected folder are deleted.
➢
5
Press the ◄ or ► button to select OK and press the ENTER button.
The music will be deleted.
➢
If you select Cancel, the deletion will be canceled.
➢
You cannot remove the following files:
➢
● Read-only files
While removing any files, don't remove the USB memory device.
➢
You cannot restore a deleted music file.
➢
Removing read-only files
When removing read-only files, the screen to the right appears.
Press the ◄ or ► button to select OK, then press the ENTER button.
The music files are removed.
If you select Cancel, the removing operation is cancelled.
➢
To exit WISELINK mode, press the EXIT button on the remote control.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Deleting Multiple Music Files
1
In the Music list, press the ▲ or ▼ button to select a music file to be deleted and press
the yellow button.
The <✔> mark appears to the left of the selected music file.
➢
Repeat the above operation to select multiple music files.
➢
2
Press the blue button, press the ▲ or ▼ button to select Delete selected File and
press the ENTER button.
3
Press the ◄ or ► button to select OK and press the ENTER button.
The selected music files will be deleted.
➢
If you select Cancel, the deletion will be canceled.
➢
To exit WISELINK mode, press the EXIT button on the remote control.
You cannot remove the read-only files from the selected ones.
➢
You cannot restore the removed pictures.
➢
Press the WISELINK button on the remote control to turn on the WISELINK mode.
English - 80