Construction And Function; Scope Of Supply; Handling Packaging Materials - Starmix haaga 355 Manuel D'utilisation

Construction and Function

4. Construction and Function
EN
Fig. 1: Component overview 1
Item no. Component
1 Telescopic bracket
2 Sweeping container
3 Handle of sweeping container
4 Plate brooms – height adjustment
5 Carrying handle
6 Plate brooms
7 Lateral guide roller
8 Impeller
The device is moved forward by pushing, via
the telescopic bracket (1). At the same time the
2 plate brooms (6) convey the sweepings in the
direction of the sweeping container (2) with the
aid of the sweeper lip (11). The fine dirt sweeping
roll (9) conveys the rest of the sweepings into the
sweeping container (2).
20
haaga 355
10
11
Fig. 2: Component overview 2
Item no. Component
9 Fine sweeping roll
10 Helical gear
11 Sweeper lip
12 Sweeping plate
13
Fig. 3: Component overview 3
Item no. Component
13 Multi-roll
12 9
Fig. 4: Detailed view of plate broom
Item no. Component
14 Connection
15 Toothed sleeve
16 Helical gear toothing
Construction and Function
haaga 355
Transport/transporting
5. Transport/transporting
5.1 Delivery
NOTE
Visible damage on the outer packing must be
14
immediately confirmed on delivery by the par-
cel service driver. If transport damage is only
15 noticed during unpacking, the parcel service
must be notified in writing within 24 hours after
delivery so that it can be liable for the damage.

5.2 Scope of supply

• Device
16
• Sliding bracket
• 2 telescopic pipes
• Operating instructions

5.3 Handling Packaging Materials

• Always dispose of packing in an
environmentally responsible manner.
• Observe the local and regional legal provisions
in force.
5.4 Storage
NOTE
Improper storage can result in damage to the
sweeping machine.
• Store the sweeping machine only in cleaned
condition and with an emptied sweeping
container.
» Information on emptying the sweeping
container can be found in Section and on
cleaning in Section of this operating manual.
EN
21