K1 System; K1-Sb Enclosure - L-Acoustics K1-SB Manuel D'utilisation

K1- - - - SB K1 SB
K1 K1 SB SB
arrayable lf enclosure for K1 arrayable lf enclosure for K1 arrayable lf enclosure for K1 arrayable lf enclosure for K1
user manual user m anual
user m user m anual anual
VERSION 2.0
4 4 4 4 K1

K1 SYSTEM

K1 K1 SYSTEM SYSTEM SYSTEM
®
The L-ACOUSTICS K1-SB enclosure belongs to the K1 Line Source System and operates over the 34 Hz to
200 Hz nominal frequency bandwidth. This response can be extended down to 25 Hz with the addition of the
®
L-ACOUSTICS SB28 subwoofer.
The system approach developed by L-ACOUSTICS
the possible configurations and optimize the system. The main components of the system are (see also Figure 1 and
Figure 2):
K1
K1-SB
K1-BUMP
K1-DELTA
KARA-DOWNK1
K1BUMP-FLIGHT
K1-LASERMOUNT
K1-CHARIOT
K1-CHARIOTCOV
K1-PLA
K1-COV
K1-SBCOV
SB28
LA-RAK
LA NETWORK MANAGER
SOUNDVISION
The K1 system components are compatible with standard L-ACOUSTICS
®
L-ACOUSTICS DO.7, DO10, and DO25 Loudspeaker cables with respective lengths of 0.7 m/2.3 ft, 10 m/32.8 ft,
and 25 m/82 ft. These cables allow connection of the K1 enclosure to the LA8 amplified controller. Each cable is an 8-
conductor cable with 4 mm
®
Note: The PA-COM and CA-COM
®
The L-ACOUSTICS DOSUB-LA8 Cable adapter is necessary to connect the K1-SB enclosure. It features one
®
8-point PA-COM and four 4-point Speakon
The K1 system is exclusively driven and powered by the L-ACOUSTICS
ensures intelligent protection, filtering, and equalization of the enclosures. Four channels of amplification are provided
along with the factory LA8 PRESET LIBRARY [3.4], ensuring the optimization and performance of the system within
the limits of the recommended configurations.
®
The L-ACOUSTICS LA-RAK Touring rack [3.4] offers an advanced solution for all L-ACOUSTICS
covering signal and power distribution in a comprehensive plug and play touring package. The LA-RAK was created as a
universal platform designed to facilitate cross-rental and to ensure compatibility with the L-ACOUSTICS
cabling standard.
Each system design configuration should first be modeled and studied using L-ACOUSTICS
Software [3.4]. Software predictions are based on the preset parameters stored in the amplified controllers.
Up to 253 amplified controllers can be interconnected and monitored through the proprietary L-ACOUSTICS
L-NET Network using LA NETWORK MANAGER Software [3.4].
K1SB_UM_ML_2-0
®
for K1 consists of the elements needed to fully take advantage of
Full range active 3-way WST
Arrayable LF enclosure for K1
Structure for flying a vertical K1/K1-SB line source array
Azimuth angle setting delta plate (to be used in conjunction with K1-BUMP)
Structure for flying KARA
Modular flight-case for up to 4 K1-BUMP flying structures
Laser support plate for a K1 or K1-SB enclosure
(refer to the K1-LASERMOUNT Technical bulletin [3.4])
Cart for an array of 4 K1 and/or K1-SB enclosures
Protective cover for an array of 4 K1 and/or K1-SB enclosures
Removable front dolly board for one K1 or K1-SB enclosure
Protective cover for one K1 enclosure
Protective cover for one K1-SB enclosure
Subwoofer enclosure
Touring rack containing three LA8 amplified controllers
Remote control software
Acoustical and mechanical modeling software
2
conductor cross-section (13 SWG, 11 AWG) and features 8-point PA-COM
®
standards are fully compatible.
®
connectors.
w w w . l - a c o u s t i c s . c o m
®
enclosure
®
as a K1-downfill array
®
accessories. These accessories include the
®
LA8 Amplified controller [3.4]. This
®
connectors.
®
systems
®
legacy analog
®
SOUNDVISION
®
6 6 6 6 en