K1Sb_X] And [K1Sb_60] Presets - L-Acoustics K1-SB Manuel D'utilisation

7.2.3

[K1SB_X] and [K1SB_60] presets

The [K1SB_X] and [K1SB_60] presets respectively include 200 Hz and 60 Hz low-pass filters combined with optimized
LF shelving equalizations allowing combination with the [K1] preset.
Depending on the chosen configuration, delays may have to be added in the presets. Refer to the LA4-8
PRESET LIBRARIES User manual embedded in the LA8 PRESET LIBRARY Pack [3.4] to obtain
the delay values.
IMPORTANT
Activate the LOAD PRESET menu from the LA8 amplified controller front panel and then select the [K1SB_X] or
[K1SB_60] preset. Refer to the LA8 User manual [3.4] for additional instructions. Each preset is also accessible using
LA NETWORK MANAGER Software (refer to the LA NETWORK MANAGER User manual [3.4]). The following
table shows the parameters which are accessible in EXTENDED mode:
LA8 Inputs / Outputs
IN A
IN B
OUT 1
OUT 2
OUT 3
OUT 4
* IN: input signal. A, B: channel A, B.
Note: The K1 and SB28 enclosures connect to additional LA8 amplified controllers (refer to the K1 and SB28 User
manuals [3.4]).
K1SB_UM_ML_2-0
Table 3: Accessible parameters in EXTENDED mode
Elements to Preset
connect Assignment*
Input Signal A IN_A
Input Signal B IN_B
K1-SB subwoofer SB_A
K1-SB subwoofer SB_A
K1-SB subwoofer SB_A
K1-SB subwoofer SB_A
SB: subwoofer enclosure.
w w w . l - a c o u s t i c s . c o m
Accessible (O) and blocked (X) controls
Mute Gain Delay
X O O
X O O
X X
O
X X
O
X X
O
X X
O
EN
Polarity
O
O
X
X
X
X
17 en 17 17 17