L-Acoustics K1-SB Manuel D'utilisation page 11

5 5 5 5 K1 K1- - - - SB K1 K1 SB SB SB ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE
®
The L-ACOUSTICS K1-SB enclosure contains two direct-radiating bass reflex-loaded 15" LF transducers.
The bass-reflex vents feature a progressive profile allowing laminar airflow. This results in increasing the output SPL
while minimizing unwanted turbulence noise.
The 15" LF transducers feature high power handling capacity combined with low distortion and thermal power
compression. The nominal impedance of the K1-SB enclosure is 4 ohms.
A single K1-SB enclosure generates an omnidirectionnal coverage pattern.
The K1-SB fully integrated rigging allows K1-SB (and K1) enclosures to combine as a variable curvature, vertical line
source array.
The K1-SB cabinet is made of high grade Baltic birch plywood with remarkable mechanical and acoustical properties for
improved long term durability.
Rear arm (x2)
Runner guide (x2)
Angle arm (x2)
Angle locking pushbutton (x2)
Angle unlocking latch (x2)
Ball locking pin
shipping location (x6)
K1SB_UM_ML_2-0
Grill
Front locator stud (x2)
Figure 3: The K1-SB enclosure
w w w . l - a c o u s t i c s . c o m
Rigging point (x4)
Stacking runner (x2)
Connector plate
EN
Handle (x4)
9 9 9 9 en