BST ACTIV-218 Manuel D'utilisation page 10

ACTIV-218
35. UNBALANCED MASTER OUTPUT
Unbalanced output. Connect it to the inputs of the main power amplifier.
36. BALANCED MASTER OUTPUT
Balanced output. Connect it to the inputs of the main power amplifier.
37. BLUETOOTH ANTENNA
Déployer cette antenne pour une meilleure portée du signal Bluetooh
38. POWER SUPPLY SELECTOR
La tension d'alimentation est différente suivant les pays ( en france : 220V ), Le réglage d'usine est 220V. Ne touchez pas à ce sélecteur
sauf si la tension d'alimentation de votre pays est 110V.
39. AC SOCKET + FUSE
Plug the AC power cord into any standard AC outlet. Before plugging this cord in, be sure the voltage of AC outlet is correct.
To protect your mixer from different kinds of ac problems. if the mixer is "on" and nothing lights, please verify fuse compartment. if fuse is
broken, please read it and change with a new one of same size and values.
USB / SD / BLUETOOTH PLAYER OPERATING
3. USB SOCKET
Connect on this slot your USB key.
Note : Before you eject the USB key, please set the playback in pause mode or select another playback source ( SD card or Bluetooth )
4. MODE BUTTON
This button has two functions:
- A simple press allows you to choose the playback source: SD, USB or Bluetooth
- A long press allows you to switch the player on or off.
Note: If you choose Bluetooth mode, the player will enable Bluetooth connection system. You will pair your Bluetooth device with the player.
To do that, you must to enable your Bluetooth system on your device. You device will search the player and find the Bluetooth system called
"BLUETOOTH"). To pair your device with the player, you must to enter the PIN code 0000. Now, your device and the payer are paired. Start
playback on your device and listen to it on the mixer.
5. PLAY / PAUSE BUTTON
This button is used to start the playback or to enter in pause mode.
6. FOLDER / RECORD BUTTON
This button has two functions:
- A simple press allows you to select a directory on the playback support (SD card or USB). Select a directory via the track selection buttons
(8 and 9). Then press the FOLDER button to enter into the directory. Select the file that you want to listen to via the track selection buttons
(8 and 9). Press the FOLDER button to start playback.
- A long press allows you to record your mix. The master signal will be recorded (all inputs except SD / USB player). The mix will be
recorded on the playback source that you used before you started the record.
7. REPEAT / DELETE BUTTON
This button has two functions:
- A simple press allows you to choose play mode (repeat all file, repeat one file, repeat intro or random play)
- A long press allows you to delete one of your recorded files. To do that, select the file you want to delete via the track selection buttons (8
and 9) then press (and hold) the repeat button to delete the file.
.
8. TRACK / SEARCH BUTTON
This button has two functions:
- A simple press allows you to select the previous file
- A long press starts a fast reverse search on the file
© Copyright LOTRONIC 2013
1. SD CARD SLOT
Connect on this slot your SD card.
Note: Before to eject SD card, please set the playback in pause mode or
select another playback support (USB or Bluetooth)
2. LCD DISPLAY
The LCD display show you some information as playback support, file
name, elapsed time, total time, file number, total file number, file system
(MP3 or WAV ) and playback mode ( Repeat one, repeat all, random or
repeat intro )
Note : In Bluetooth mode, the LCD display shows only connexion status
(connected or disconnected ). All playback information appears on the
Bluetooth device.
BSTDJ.COM
Page 10