Changing The Lamps - Franke FDMO 607 I Mode D'emploi Et Installation

11W neon lamps
• Remove the Metal grease filters.
• Unfasten the screw fixing the Neon cover, and unhook the
cover from the hood canopy.
• Change the lamp and insert a new one of the same type.
• Replace the Cover.
• Replace the Metal grease filters.
• Unfasten the screws fixing the Led cover.
• Lift the cover and unfasten the connector.
• Remove the Led from the cover and replace it with a new one
of the same type.
• Fit the new Led in the cover, fasten up the connector again and
replace the cover, using the screws removed as above.
EN
Lighting

CHANGING THE LAMPS

Lighting
CHANGING A LED
1
17
7