Bluetooth Pairing - Amplicomms BTH 1400 Mode D'emploi

Bluetooth pairing

1 Switch on the receiver.
2 Press and hold down the MIC button for approx. 5 seconds. The indicator
LED will flash green and blue.
3 Now run on the transmitter (e.g. on your mobile phone) the necessary
steps. If necessary, refer to the relevant user manual for help. The Blue-
tooth name of the receiver is "amplicomms".
4 If the devices are paired successfully, the indicator LED lights blue con-
stantly.
NFC pairing
If your sending device (e.g. your mobile phone/smartphone) supports NFC
(Near Field Communication), attach the receivers area marked with the NFC-
Logo ( ), as near as possible to the relevant area on the sender for a few
seconds. It will then activate the Bluetooth function and pair with each other
automatically.
Changing the rubber ear buds
Two pairs of ear buds are delivered with the device (L=large/S=small).
The ear buds "L" (large) are already mounted on the headset.
1 For changing the ear buds pick the mounted ear buds at the end and tear
them off simply.
2 Position the spare ear buds onto the "open ends" and let them snap into
place.
(See page 25 for costs and hours of operation)
Helpline UK 0844 800 6503
G
ETTING STARTED
17