Berner 141016 Mode D'emploi page 19

Operation
Thank you for choosing a Berner Voltage tester.
Non-contact voltage tester from 12 V AC
|
High performance LED flashlight
|
Vibrates if voltage is detected.
|
Non-contact voltage test
The Berner 114 is capable of detect-
ing wires carrying live voltages using
its built-in circuits in its tip.
If a voltage of 110 V AC or more is
detected, the white cap will glow red
(1a) and the device vibrates. To de-
tect voltages below 110 V AC, switch
the flashlight on using the switch
(1b). Now voltages from 12 V AC can
be detected.
A flowing current is not required!
Flashlight
Turn on the built-in flashlight with the switch (1b). Using
a high-performance LED a burning time of up to 60 hours
per set of batteries is possible! The life of the LED is over
100,000 hours.
Changing the batteries
Insert a screwdriver in to the notch (2) and pry the bat-
tery compartment cover off. Make sure you insert the
batteries the right way round!
- 18 -