Before Operating; To Set The Clock; Stop/Clear; Open Or Close Microwave Drawer - Fulgor Milano F7DMW24S2 Guide D'utilisation Et D'entretien

Before operating your new Drawer Microwave make sure
you read and understand this operation manual completely.
The following steps MUST be taken before any functions
can be used.
Before you use the Drawer Microwave:
1. Plug in the Drawer Microwave. ENJOY YOUR
MICROWAVE TOUCH CLEAR AND TOUCH CLOCK
will appear.
2. Touch the STOP/CLEAR pad. . : will appear.
3. Set clock.

To Set the Clock

1. Touch TIMER/CLOCK pad and number 2.
2. Enter the correct time of day by touching the numbers in
sequence. Touch TIMER/CLOCK pad.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, ERROR will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
If the electrical power supply to your Drawer Microwave
should be interrupted, the display will intermittently show
ENJOY YOUR MICROWAVE TOUCH CLEAR AND TOUCH
CLOCK after the power is reinstated. If this occurs during
cooking, the program will be erased. The time of day will
also be erased. Simply touch STOP/CLEAR pad and reset
the clock for the correct time of day.

4 - BEFORE OPERATING

Stop/Clear

Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Pause the microwave temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking. (Touch twice to cancel
timed cooking.)

Open or Close Microwave Drawer

Always Touch the OPEN or CLOSE pad on the control panel
to open or close the Drawer Microwave.
Do not push or pull the drawer by hand, except in case of
emergency, such as a power failure. If necessary, push or
pull slowly.
EN
7