Audible Signal Elimination; End Of Cooking Reminder; Auto Start; Demonstration Mode - Fulgor Milano F7DMW24S2 Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour F7DMW24S2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Audible Signal Elimination

At the end of timed cook, beeps will sound. The audible
signal can be turned off if you prefer quiet operation.
To Turn Sound Off
1. Touch SETUP/HELP pad.
2. Touch SETUP/HELP pad again.
3. Touch START/+1 MIN pad. The display shows SOUND
OFF.
To Restore Sound
1. Touch SETUP/HELP pad.
2. Touch SETUP/HELP pad again.
3. Touch START/+1 MIN pad. The display shows SOUND
ON.

End Of Cooking Reminder

At end of timed cooking, the microwave will signal every
10 seconds for the first minute; then every 3 minutes until
STOP/CLEAR pad is touched, up to one hour.
To Turn Reminder Off
1. Touch SETUP/HELP pad three times.
2. Touch START/+1 MIN pad.
To Turn Reminder Signal Back On
1. Touch Setup/Help pad three times.
2. Touch START/+1 MIN pad.

Auto Start

If you wish to program the Drawer Microwave to begin
cooking automatically at a designated time of day, follow
this procedure.
1. Touch SETUP/HELP pad 4 times.
2. Touch START/+1 MIN pad.
3. Enter start time.
4. Touch TIMER/CLOCK pad.
5. Touch the number keys to enter cooking time. Touch
POWER LEVEL pad repeatedly until the desired power
level is reached.
6. Touch START/+1 MIN pad.

OTHER FEATURES

Demonstration Mode

To Select Demo Mode
1. Touch SETUP/HELP pad five times.
2. Hold START/+1 MIN pad for 3 seconds. The display
shows DEMO ON.
To Cancel Demo Mode
1. Touch SETUP/HELP pad five times.
2. Touch START/+1 MIN pad. The display shows DEMO
OFF.
NOTE:
• Drawer Microwave doesn't heat in Demo Mode.
• Display counts down quickly.

Timer

1. Touch TIMER/CLOCK pad and number 1.
2. Enter time.
3. Touch TIMER/CLOCK pad again.
To cancel timer, touch STOP/CLEAR.

Standby Mode

This microwave will go into standby mode after a period
of inactivity. The backlight of the display will automatically
dim after 3 minutes if the unit has not been in operation.
If the display is in standby mode, simply touch the control
panel or open/close the door to return the backlight to
maximum brightness.
5 - SETTINGS
EN
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières