Technical Data - ROTOR RBB 2 Mode D'emploi

CH-3661 Uetendorf

4. TECHNICAL DATA

Power supply:
(version RBB2)
Power supply :
(version RBB3)
Power requirement:
(version RBB2)
Power requirement:
(version RBB3)
Motor:
Motorcontrol:
(version RBB2)
Motorcontrol:
(version RBB3)
Electrical equipment:
Jar content :
Construction:
Weight:
Temperature range:
Humidity:
Altitude:
We reserve the right to make technical
changes at any time.
Instruction Manual
Rotor Bar Blender
230 V / 50 Hz / 1,8 A, or 120 V / 60 Hz / 4,2 A
(tension +/- 6%, frequency +/- 2 Hz, sinusoidal, interference free)
230 V / 50 Hz / 3,2 A, or 120 V / 60 Hz / 5,8 A
(tension +/- 6%, frequency +/- 2 Hz, sinusoidal, interference free)
400 W continuous operation (max. 700 W)
550 W continuous operation (max. 1 000 W)
- High temperature resistant collector motor with fan
- max. speed ca. 23 000 rpm
- 2 speeds
- 3 speeds (automatically regulated)
- according to standard EN-60335-1 (grounded/protection class I)
- electromagnetically shielded accordance with
EMC-directives 89 / 336 EEC (230 V)
- the motor has a thermal protection switch
2 Liter (processing amount up to 1,7 Liter, depending on the
consistency and motor version).
- Motor base is made out of stainless steel
- Cutter blades made out of stainless steel
4 kg net, with stainless steel container 4,6 kg
operating: 10...40°C
storage: -20...70°C
operating: 0...80% non condensing
storage: 0...95% non condensing
0..2 000 m. (0...6 600 ft)
© Rotor Lips AG
13