Technical Data - Stalgast 801350 Notice D'instruction

3. TECHNICAL DATA

Unit's equipment (page 2):
1 - Control panel, 2 - Dishwasher door, 3 - Bottom panel, 4 - Adjustable feet, 5 - Chamber, 6 - Drain hose,
7 - Water connection, 8 - Terminal box, 9 - Nameplate, 10 - Connection giagram label
Model
Dimensions
Power Supply
Frequency
Maximum Energy Consumption
Supply water pressure
Supply water temperature
Hardness of water in the water
network
Water consumption
Boiler capacity
Tank capacity
Standard cycle duration
Noise level
Protection
Net weight
Power cord type H07RN-F
Wash water temperature
Rinse water temperature
The dishwasher has an automatic sanitization function (it is an integral part of the washing cycle).
4. INSTALLATION
4.1. Positioning of the device
The device should be moved to the place of installation, unpacked and the package contents should be checked. In the even
any damage to the device or any of its elements is detected, this must be immediately notifi ed to the transport company.
The packaging material must be kept away from children and pets, as they may cause an accident. All materials used for the
packaging of the device are environment-friendly and can be safely stored in an appropriate place.
Items intended for recycling are marked as follows:
• PE – polyethylene: external packaging, manual cover, protective packaging,
• PP – polypropylene: handles,
• PS – polystyrene foam: edge protection, package cover.
• Wooden and cardboard elements of the device should be left in places intended for this purpose in accordance with the
applicable laws.
It is prohibited to store the elements of the device and the device itself directly in the natural environment. The device is
made of stainless steel and the elements which can be easily removed. The plastic components of the device are marked
with an appropriate symbol.
All connections to the device must meet the standards applicable in the place of installation. The manufacturer is not
liable for any injuries or damage to the product resulting from failure to comply with the standards applicable in the place
of installation. Before installing the device, it is necessary to make sure that the moisture-sensitive elements are properly
secured against getting wet, e.g. during the cleaning of the device. The device should be placed in the desired location and
then the protective packaging should be removed. The device should be leveled using a spirit level and four adjustable legs in
order to ensure its stability. Any other way of leveling the device should be approved by the manufacturer.
801350, 801400,
801351, 801401,
801352 801402
415x530x665 465x565x700
230 V/l
2730 W
2,4 l/cycle
2,5 l
10 l 14 l
120/180 sec.
29 kg 32 kg
3x1.5mm with plug
2
- 28 -
801505, 801506,
801507, 801515,
801516, 801517
565x665x835
230V/l
50 Hz
3400 W 4900 W
2-4 Bar
max 55°C
5-6 dH
2,5 l/cycle
5,5 l
26 l
120/180 sec.
64 dB(A)
IPX3
56 kg
3x2.5mm
2
60-65°C (140-149°F)
82-90°C (181-194°F)
801555,
801556,
801565,
801566
400V/3+N+PE
6650 W
2,5 l/cycle
6,5 l
26 l
90/120/180 sec.
58 kg
5x1.5mm
2