Accessories - Hoover Steam Capsule Express Manuel D'utilisation

GETTING TO KNOW YOUR CLEANER
A. Safety Cap
B. Steam Trigger Lock
C. Steam Release Trigger
D. Handle
E. Cleaner Main Body
F. Steam Ready Light
G. Steam Outlet
H. Steam Hose
I. Refresh Conical Pipe
J. Deep Cleaning Conical pipe
K. Small Round Brush
L. Curved Nozzle
M. Copper Round Brush
N. Comb Nozzle
ASSEMBLING YOUR CLEANER
WITHOUT HOSE
Attach one of the conical pipes [I, J] to the steam outlet [G]; Rotate the conical pipe
clockwise aligning the graphic marks until securely locked in position. [1a]
WITH HOSE
Attach the hose [H] to the steam outlet [G]; Rotate the hose clockwise aligning the
graphic marks until securely locked in position. [2a]
Once the conical pipe or hose are attached, they can be used for direct steam applications
or you can attach an accessory.
You can choose from a variety of accessories depending on what tasks you are
performing.
To attach an accessory, fit the conical pipe to the steam outlet or the end of the
hose, fit the accessory onto the conical pipe and rotate clockwise until locked
into position. [3]
To remove the conical pipe or hose, switch off your product and allow it to cool down,
rotate counter-clockwise and gently pull away from cleaner. [1b & 2b]
O. Shovel Plate
P. Multi-Purpose Nozzle
Q. Refresh Tool
R. Textile Pad
S. Large Scraper
T. De-scaling tool
U. Measuring Jug
USING YOUR CLEANER
You can choose between Dry Steam mode or Wet steam mode.
Dry steam mode is recommended for textile cleaning and refreshing clothes.
Wet steam mode is recommended for all other surfaces and deep cleaning.
1. Remove the safety cap by turning anti-clockwise. [4]
2. DRY Steam Mode: Fill the boiler with 200ml of normal tap water or demineralized
water. [5]
3. WET Steam Mode: Fill the boiler with 370ml of normal tap water or demineralized
water. [6]
IMPORTANT: The steam release trigger must be pressed during filling for WET steam. [6]
4. Re-fit the safety cap to the boiler turning clockwise, ensuring it is shut tightly.
5. Attach the accessory most suited for the surface and task to be performed. [3]
6. Plug the mains cable into a suitable earthed mains power outlet. The steam ready
light will illuminate red. When the light changes from red to green, the product is ready
to deliver steam.
7. To deliver steam, release the trigger safety lock [7] and push steam release trigger
[8]. Ensure the trigger safety lock is in the locked position when your product is not
in use. [7]
NOTE: In order to significantly reduce mineral build-up and to prolong the life of your
steam cleaner, it is highly recommended to use distilled or demineralised water.
IMPORTANT: Always unplug the cleaner and press the steam release trigger to
release any remaining steam pressure before adding water. [17]

ACCESSORIES

According to your cleaning needs, you can choose bewteen 2 conical pipes:
Refresh conical pipe allows you to have less powerful steam but a longer steaming
time. It is advised for delicate surfaces and for longer cleaning sessions.
Deep Cleaning conical pipe allows you to have more powerful steam and is advised for
deep cleaning, especially on heavily soiled areas such as showers and kitchens.
NOTE: All accessories can only be attached to the conical pipes and cannot be
connected directly to the product or the hose.
Comb Nozzle: Ideal for removal of limescale and grime. [10]
Copper Round Brush: Ideal for removal of very stubborn stains. [11]
Shovel Plate: Ideal for removal of baked in grease from ovens and racks. [12]
Curved Nozzle: Ideal for cleaning hard to reach areas such as taps etc. [13]
Small Round Brush: Ideal for use on stubborn grease and grime. [14]
Multi-Purpose Nozzle: this is used along with the Large scraper, Textile pad and Refresh
tool. [9]
1. Large scraper: insert the multi-purpose nozzle into the large scraper, which is ideal for
2
GB