Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
1. Switch off the appliance and wait
5 minutes.
2. Switch on the appliance and then
press and hold down the super button,
Fig. "/2, for 3–5 seconds within the
first 10 seconds until an acoustic
signal sounds.
The self-test programme starts.
While the self-test is running, a long
acoustic signal meanwhile sounds.
If 2 acoustic signals sound and the set
temperature is displayed after the self-
test has ended, your appliance is OK.
If 5 acoustic signals sound and the
super button flashes for 10 seconds after
the self-test has ended, there is a fault.
Inform customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Customer service
Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig. *
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
en
31
Publicité
Table des Matières
