Alecto DVC-180 Mode D'emploi page 69

4. TO MOUNT THE CAMERA ON A FIXED SPOT.
The camera can be placed on a flat spot or mounted on a fixed wall.
Attention: Make sure the camera is already registered to the Wi-Fi network.
When the camera is installed and then connected to the mains, it'll re-establish
the connection with the network. Please first check whether a proper connection
can be established with your Wi-Fi router.
Behind the camera is a mounting holder for mounting the camera on a wall.
Press the clips at the back of the camera one after the other and pull the holder
off. Make sure that the mounting bracket is fastened to the wall with screws so
that the camera is facing the right direction. After assembly, the camera ball
can be pressed into the holder in the opposite direction as when removing. The
camera lens must be adjusted vertically (up and down) manually when setting.
The camera lens can be oriented horizontally via the app.
By swiping horizontally over the image during live view, the camera lens can be
rotated left or right.
69