GRAMMER OFFICE Sail Guide D'utilisation page 6

To make it easier for you to use the adjustment functions to position your chair
in an ergonomically correct way, we have put together these short instructions.
1
Seat height
Move seat down: Put pressure on the seat – Pull the
rear button underneath the right-hand side of the
seat outwards – The seat moves slowly downwards
– Release the button when the seat reaches the re-
quired height – The seat locks into position.
Move seat up: Relieve pressure on the seat – Pull
the rear button underneath the right-hand side of
the seat outwards – The seat moves slowly up-
wards – Release the lever when the seat reaches
the required height – The seat locks into position.
2
Weight adjustment
Using quick adjustment option: Turn the knob under-
neath the right-hand side of the seat forwards: the
backrest counterforce increases – Turn the knob
backwards: the backrest counterforce decreases.
3
Freely selectable opening angle
Turn the knob on the left-hand side underneath the seat
forwards: The opening angle is reduced –
Turn the knob on the left-hand side underneath the seat
backwards: The opening angle is increased – The
aperture angle can be set into 4 different positions.
4
Seat depth adjustment (optional)
Press the front button on the right-hand side be-
neath the seat – Push the cushion to the desired
position – Release the button – The seat snaps
into place.
5
Height- and depth-adjustable lumbar sup- Height- and depth-adjustable lumbar sup-
port (optional)
Height adjustment: Relieve pressure on the backrest –
Move the wheel on both sides of the lumbar support
upwards or downwards – Move the lumbar sup-
port into the required position – Release the wheel.
Depth adjustment: Move the wheel on the lumbar
support forwards or backwards until you feel a
comfortable support in the back.
6
Height- and depth-adjustable lumbar
support SAIL PLUS (optional)
Height adjustment: Relieve pressure on the back-
rest - Move the wheel on the right-hand side back-
wards to move the lumbar support upwards - Move
the wheel forward to adjust the lumbar support
downwards.
DE EN
Depth adjustment: Relieve pressure on the backrest
- Move the wheel on the left-hand side of the back-
rest forward or backwards until you feel a comfor-
table support in the back.
7
CatBack (optional)
This self-regulating backrest system works auto-
matically. Simply sit down and lean back to en-
joy perfect back support thanks to the CatBack
system.
8
Headrest (optional)
Simply move the headrest into the required posi-
tion – The headrest stays automatically.
9
2-D armrests (optional)
Height adjustment: Push the button on the outside
of the armrest – Raise or lower the armrest into the
required position – Release the button – The arm-
rest snaps into place.
Width adjustment: Open the locking lever underneath
the armrest – Move the armrest into the required
position – Tighten the lever.
10
4-D armrests (optional)
Height adjustment: Push the button on the outside
of the armrest – Raise or lower the armrest into the
required position – Release the button – The arm-
rest snaps into place.
Width adjustment: Open the locking lever underneath
the armrest – Move the armrest into the required
position – Tighten the lever.
Depth adjustment: Move the armpad forwards or
backwards into the required position – The arm-
pad automatically snaps into place.
Pivotable armpad: Pivot the armpad into the required
position – Release the armpad – The armpad auto-
matically snaps into place.
11
Use
This office swivel chair may only be used as intend-
ed and with general due diligence. If used in any
other way (e. g. as a climbing aid or if you sit on the
armrests), there is a risk of accidents.