Product Description And Specifications; Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PFS 5000E Notice Originale

Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is only intended for spraying emulsion and la-
tex paints, solvent-based and water-dilutable lacquers, glaz-
es, primers, clear lacquers, wood stains and oils (ALLPaint).
The power tool is not suitable for spraying caustic solutions,
acidic coating materials and house paints.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Spray gun
2 Air cap
3 Union nut
4 Thumbwheel for spraying capacity
5 Trigger switch
6 Lock ring
7 Container for spray material
8 Spare container for spray material
9 Hose port (spray gun)
10 Nozzle cap (white: for a "wall" application)
11 Nozzle cap (grey: for a "wood/glaze" application)
12 Nozzle cap (black: for a "wood/lacquer" application)
13 Filling sieve
14 Transfer bucket*
15 Nozzle needle
16 Container seal
17 Suction tube
18 Ventilation hole
19 Paint channel
20 Air hose
21 Bayonet lock
22 Base unit
23 Carrying handle
24 Holding clamp
25 On/off button with air flow control
26 Hose connection (base unit)
27 Accessory compartment
28 Cleaning brush
29 Air filter cover
30 Air filter
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools

Technical Data

Fine-spray System
Article number
Rated power input
Spraying capacity
Required time for application
2
of paint on 3 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745
and EN 50580.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
a <2,5 m/s , K= 1,5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
and EN 50580 according to the provisions of the directives
2011/65/EU, 2006/42/EC, 2004/108/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
English | 21
PFS 5000E
3 603 B07 2..
W
ml/min
min
ml
m
kg
2
.
1 609 92A 0MW | (28.2.14)
1200
500
1
1000
4
5.2
/II