Vacuum Packing In Bottles - Unold SILBER Notice D'utilisation

Opening the vacuum packed container
When you wish to open a vacuum packed container, please turn the button on
the lid of the container so that the arrow points to "Öffnen". Then you can easily
open the lid.

VACUUM PACKING IN BOTTLES

The vacuum bottle stopper included with your vacuum packing machine can
be used on wine or oil bottles, for example, so that you can easily preserve the
aroma and freshness of any liquid.
Caution: Do not use the vacuum packing bottle stoppers for very thin glass bottles,
for crystal, plastic or aluminum bottles or for damaged bottles.
Please do not vacuum pack any carbonated liquids. These liquids have to be
preserved under pressure. Vacuum packing causes them to lose the carbonation.
1. Prepare the appliance as descri-
bed in the section "Preparing the
appliance for operation".
2. Insert the bottle stopper into the
opening in the bottle. There must
be at least 2.5 cm of air between
the liquid in the bottle and the
lower edge of the vacuum packing
bottle stopper.
3. Insert one end of the hose inclu-
ding with your vacuum packing
machine into the connection
on the appliance and the other
end into the hole in the vacuum
packing bottle stopper.
4. Close the cover of the vacuum
packing machine and press the
two catches on the right and left
Opening the vacuum packed bottles
If you wish to open a vacuum packed bottle, simply pull the stopper out of the
bottle.
28
of the appliance inward at the
same time.
5. Press the button "Vacuum &
Seal". The indicator lamp lights
up red and then orange to indi-
cate that the appliance is in ope-
ration. Then the indicator lamp
lights up green.
6. Remove the hose from the appli-
ance and
packing bottle stopper.
7. The vacuum packing process is
now completed.
8. If you wish to interrupt the pro-
cess, press the button "Vacuum &
Seal" again.
from the vacuum