7.
After a short time the indicator
lamp lights up red, the appli-
ance works for another approx.
2 seconds.
8.
Once the process is completed,
the cover of the appliance opens
slightly and the indicator lamp
lights green.
VACUUM PACKING IN THE CONTAINER
Please use only containers that are suitable for vacuum packing.
If you wish to vacuum pack liquids in the container, cool them in the refrigerator
first. If you wish to vacuum pack ground or granulated foods in the container,
please place a paper towel on top of the food before closing the lid and starting
the vacuum packing process.
1.
Prepare the appliance as descri-
bed in the section "Preparing the
appliance for operation".
2.
Place the food to be vacuum
packed in the container. Leave a
space of at least 1 cm between
the contents and the top edge of
the container.
3.
The lids of the vacuum contai-
ner are labeled "Öffnen" (Open),
"Vakuum" (Vacuum") and "Ver-
riegeln" (Lock). Turn the button
on the lid of the container so that
the arrow points to the "Vakuum"
position and close the container
with this lid.
4.
Insert one end of the hose inclu-
ded with your vacuum packing
machine into the connection on
the appliance and the other end
into the valve on the lid of the
vacuum container.
5.
Close the cover of the vacuum
packing machine and press the
9.
Open the lid and remove the bag.
10. Now
you
packing, as described.
11. If you wish to interrupt the vacuum
packing process, press the button
"Vacuum & Seal".
two catches on the right and left
of the appliance inward at the
same time.
6.
Press the button "Vacuum &
Seal". The indicator lamp lights
up red and then orange to indi-
cate that the appliance is in ope-
ration. Then the indicator lamp
lights up green. Now turn the but-
ton on the lid of the container so
that the arrow points to "Öffnen";
the vacuum packing process is
completed.
7.
Remove the hose from the appli-
ance and from the container.
8.
The vacuum packing process is
completed and the food in the
container is vacuum packed.
9.
If you wish to interrupt the pro-
cess, press the button "Vacuum &
Seal" again.
can
start
vacuum
27