Philips Azur GC4043 Mode D'emploi page 7

Vertical Shot of Steam (Type GC4043, GC4040, GC4038,
GC4035, GC4033, GC4030, GC4028, GC4025, GC4023,
GC4020, GC4018, GC4015, GC4013, GC4010)
C
1 The Shot of Steam function can also be used when you hold
the iron in vertical position.
Never direct the steam towards people.
Automatic Anti-Calc system (Type GC4043, GC4040,
GC4038, GC4035, GC4033, GC4030, GC4028, GC4025,
GC4023, GC4020, GC4018, GC4015)
C
1 The built-in Anti-Calc system automatically reduces deposit of
scale and ensures a longer life of the iron.
Auto-shut-off (Type GC4043, GC4040, GC4038, GC4035,
GC4033, GC4030)
C
1 An electronic safety device will automatically switch off the
iron if it has not been moved for a while.
To indicate that the iron has been switched off, the red auto-off
pilot light will start blinking.
To heat up the iron again:
- Pick up the iron or move it slightly.
- The red auto-off pilot light will go out.The amber temperature pilot
light may come on, depending on the soleplate temperature.
- If the amber pilot light comes on after the iron is moved, wait for it
to go out before start ironing.
- If the amber pilot light does not come on after the iron is moved, the
iron is ready for use.
ENGLISH
7