en
Interior fittings
(not all models)
Glass shelf "EasyLift"
Fig. $
The height of the glass shelf can be
adjusted without taking it out.
Pull right lever to move the shelf
upwards. Pull left lever to move the shelf
downwards.
Notes
Only ever press one lever.
■
If a load exceeds 5 kg, the position
■
of the shelf can no longer be
changed.
Fixed glass shelf
Fig. %
To change the position of the fixed glass
shelf, press buttons on the underside
and detach the glass shelf from
the fixing. Reposition stopper. Re-insert
glass shelf and fix by applying light
pressure.
Door shelf "EasyLift"
Fig. &
The height of the door shelves can be
adjusted without taking them out.
Simultaneously press up the buttons on
the underside of the door shelves
to move the door shelves downwards.
They can be moved upwards without
pressing the buttons.
Bottle shelf
Fig. '
Bottles can be stored securely on
the bottle shelf. The holder can be
adjusted.
30
Switching off and
disconnecting the
appliance
Switching off the appliance
Fig. !
Press the On/Off button 6.
Refrigerating unit and light switch off.
Disconnecting the appliance
If you do not use the appliance
for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.
Defrosting
Refrigerator and "cool-fresh"
compartments
While the appliance is running,
condensation droplets or frost form on
the rear panel of the refrigerator
compartment. As the rear panel defrosts
automatically, it is not necessary to
remove the frost or the condensation
droplets. The condensation runs through
the condensation channel and the
drainage hole to the evaporation pan
where it evaporates.
Note
Keep the condensation channel
and drainage hole clean, so
the condensation can drain off. Fig. (