Setting The Temperature; Cool-Fresh Compartment; Super Cooling; Alarm Function - Bosch KIF27 Série Mode D'emploi

Operating tips
After the appliance has been switched
■
on, it may take several hours until the
set temperature has been reached.
Do not put any food in the appliance
beforehand.
The front sides of the housing are
■
partly heated slightly. This prevents
condensation in the area of the door
seal.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button on refrigerator compartment 3,
until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display for the refrigerator
compartment 4.

Cool-fresh compartment

The temperature in the "cool-fresh"
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased. (See
chapter "Eliminating minor faults
yourself".)

Super cooling

Super cooling sets the refrigerator
temperature to the coldest temperature
setting for approx. 6 hours. Then
the appliance automatically switches
to the temperature set prior to super
cooling mode.
Switch on super cooling mode, e.g.
before placing large quantities of food
■
in the refrigerator compartment.
for the fast cooling of drinks.
■
Switching on and off
Fig. "
Press super button 2 refrigerator
compartment.
The button is lit when super cooling
is switched on.
Note
When super cooling is switched on,
increased operating noises may occur.

Alarm function

Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close
the door to switch off the warning signal.
Switching off the alarm
Fig. "
Press the alarm button 1 to switch off
the warning signal.
en
27