Cleaning The Main Unit - Microlife PF 100 Mode D'emploi

1. Disconnect the measuring tube from the main
unit by moving it in a forward direction.
2. Disconnect the mouthpiece from the
measuring tube.
3. Rinse the tube in distilled water, afterwards
please shake off the water and put it on a
fresh paper towel for complete drying.
•
In case another user has already used
the monitor the measuring tube should be
disinfected:
1. Disconnect the tube as explained above and
put it into a commonly available disinfecting
solution. Please carefully follow the
instructions for the disinfecting solution!
2. Never put the measuring tube into boiling
water!
3. Reconnect the mouthpiece to the measuring
tube and reassemble it back to the main unit as
shown. Make sure that the tube finally
«clicks» into the fixed position.
4. Please make sure that the mea-
surement tube and the device stay
together by confirming that the
identification on tube and device is
the same.

7.3. Cleaning the Main Unit

Clean the main unit once a day with a clean,
damp cloth. Never put the main unit into
water!
PF 100
100 C/212 F
10