Dell 1800MP Manuel De L'utilisateur page 35

(continued)
Problem
TEMP light and Power light
are solid orange
TEMP light is blinking
orange
The OSD does not appear on
the screen
The remote control is not
operating smoothly or works
only within a limited range
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
34 Troubleshooting Your Projector
(continued)
Possible Solution
The lamp driver has overheated. The display
automatically shuts down. Turn the display on
again after the projector cools down. If the
problem persists, contact Dell.
A projector fan has failed and the projector
will automatically shut down. If the problem
persists, contact Dell.
Try to press the Menu button on the panel for
15 seconds to unlock the OSD. Check the
Menu Lock on page 27.
The battery may be low. Check if the laser
beam transmitted from the remote is too dim.
If so, replace with 2 new AAA batteries.