Specifications - Korg KM-402 Manuel D'utilisation

5. When you've specified the left and right points, hold down the HOLD button and press the
PROGRAM MEMORY 3 button.
The display will blink "SET", and the settings will be stored. When the settings have been
stored, the display will indicate "End".
6. To finish the setting, turn off the power, and then turn the power on again in the normal way.
Note: If you initialize the KAOSS PAD function to the factory-set state, the crossfader adjustment setting will
also be initialized.

Specifications

Power supply:
Power consumption:
Dimensions:
Weight:
Frequency response:
S/N:
INPUT (LINE)
Connectors:
Input impedance:
Nominal level:
PHONO
Connectors:
Input impedance:
MIC INPUT
Connectors:
Input impedance:
Nominal level:
MASTER OUTPUT L/R
Connector:
Nominal level:
Load impedance:
BOOTH OUTPUT L/R
Connector:
Nominal level:
Load impedance:
PHONES OUTPUT
Connector:
Output impedance:
Maximum level:
Included items
Power cable
Owner's manual
* Appearance and specifications of this product are subject to change without notice.
14
AC Local Voltage
KM-402: 23W
KM-202: 20W (120V), 17W (220–230V)
288mm (W) 384mm (D) 107mm (H) / 11.34" (W) 15.12" (D) 4.21" (H)
5.0kg / 11.02lbs.
20 Hz–20 kHz ±1.0 dB (Typ.)(LINE)
90 dB @IHF-A (Typ.)(LINE)
RCA jacks L/R
10 kΩ
0 dBu
RCA jacks
40 kΩ
PHONO RIAA compliant
1/4" mono phone jack
50 kΩ
-50 dBu
RCA jacks L/R
0 dBu
greater than 10 kΩ
RCA jacks L/R
0 dBu
greater than 10 kΩ
1/4" stereo phone jack
32 Ω
80 mW + 80 mW @32 Ω